Equipments
VARTM
VARTM INFUSION PROCESS (VACUUM RESIN TRANSFER MOLDING)
Over the years, Fibrotek has developed solid expertise with the VARTM process (Vacuum Resin Transfer Molding) allowing us to control this method to perfection. Followed by autoclave pressure cooking as well as a detailed inspection, the molds and parts manufactured by Fibrotek are distinguished by their our experts in the development of materials and processes are continuously working to improve our knowledge and our process control. resin infusion and can also adapt it to the requirements of our customers.autoclave
AUTOCLAVE
- 9 feet in diameter X 24 feet long
- Pressure up to 225 PSI
- Maximum temperature of 550F (288°C)
curing ovens
OVEN A
- Designed and built by Fibrotek
- 7.5 feet long X 5.5 feet width X 3.5 feet height
- Maximum temperature of 350F (177°C)
OVEN B
- Designed and built by Fibrotek
- 24 feet long X 12 feet width X 12 feet height
- Maximum temperature of 550F (288°C)
inspection
Fibrotek offers a range of metrology solutions at all stages of product lifecycle management with the use of HandyScan 3D, a portable metrology-grade 3D scanner. Whether its quality control, tooling validation, inspection of parts, or reverse engineering; this ultra-fast handheld 3D scanner is capable of quickly delivering accurate and high-resolution 3D scans with complex surfaces and under any environmental condition. It offers accuracy up to 0.030 mm (0.0012 in.) and a maximum resolution of 0.050 mm (0.0020 in.). Its top acquisition rate is 480,000 measurements/s.
Used in conjunction with a post-treatment software, the 3D scan data can be finalized and exported as a readable 3D file for inspection, 3D printing, and CAD software (CATIA, SolidWorks, Inventor, etc.).
With this new generation scanner, we can offer our customers virtually limitless 3D scanning regardless of the part size, complexity, material, or surface
Other equipments
EN_CA 
FR_FR